Test Unit
| LED | Meaning |
|---|---|
| Off | The Locator is powered off. |
| Flashing Orange and Red | No SIM No GPS Fix |
| Flashing Orange and Green | No SIM GPS Fix |
| Flashing Red | SIM OK No GSM No GPS Fix |
| Flashing Green | SIM OK No GSM GPS fix |
| Solid Red | SIM OK GSM OK No GPS Fix |
| Solid Green | SIM ok GSM ok GPS Fix |
| 1 Second flutter (red or green depending on GPS) | Message sent or received |
| Orange flutter at power up | Internal battery installed |
If the device LED is demonstrating and uninterrupted green light:
The Locator has both GPS and GSM network coverage. If you generate and ignition event you will see the data on you fleet management login screen.
If the LED is flashing Red one second off and one second on:
The Locator has neither a GPS fix nor GSM cell coverage. Please ensure that the GPS antenna has a clear line of sight to the sky and that your vehicle is within a GSM network area.
If the device LED is demonstrating an uninterrupted Red light:
The device has cell network activation but no GPS network visibility. Please ensure that the GPS antenna is properly connected to the device and has a clear view from the sky.
If the LED is flashing Green one second off and one second on:
The device has GPS activation but no cell network. Please ensure that the GSM antenna is properly attached to the device and that your vehicle is in an area with cell network coverage.
If the LED is flashing Orange and Green:
There is a problem with the SIM. Ensure the SIM card is correctly in place. Also ensure the SIM is correctly enabled for the wireless network.
If the LED is flashing Orange and Red:
There is a problem with the SIM and no GPS network visibility. Ensure the SIM card is correctly in place. Check that the SIM is correctly enabled for the wireless network. Make sure the GPS antenna is properly connected to the device and has a clear view of the sky.
If the LED Flutters Orange at power up:
The internal battery is installed. If this Locator is battery powered and the LED DOES NOT flutter at start up, then the battery is not properly connected. Check the battery's connection and power. Please note, in some cases the battery is not charge when it is shipped. After you have connected the battery and connected the unit to a po0wer source, wait 4-5 minutes until the battery is charged to a level that can light the LED.
